Dynamic Agents on AWS¶

This document describes how to install, configure, and upgrade a deployment of Determined with Dynamic Agents on AWS. See Elastic Infrastructure for an overview of the elastic infrastructure in Determined.

System Requirements¶

EC2 Instance Tags¶

An important assumption of Determined with Dynamic Agents is that any EC2 instances with the configured tag_key:tag_value pair are managed by the Determined master (See Cluster Configuration). This pair should be unique to your Determined installation. If it is not, Determined may inadvertently manage your non-Determined EC2 instances.

EC2 AMIs¶

The Determined master node will run on a custom AMI that will be shared with you by Determined AI.
Determined agent nodes will run on a custom AMI that will be shared with you by Determined AI.

EC2 Instance Types¶

The Determined master node should be deployed on an EC2 instance supporting >= 2 CPUs (Intel Broadwell or later), 4GB of RAM, and 100GB of disk storage. This corresponds to an EC2 t2.medium instance or better.
Each Determined agent node must be any of the P3 or P2 instances on AWS. This can be configured in the Cluster Configuration.

Master IAM Role¶

The Determined master needs to have an IAM role with the following permissions:

ec2:CreateTags: used to tag the Determined agent instances that the Determined master provisions. These tags are configured by the aws-cluster-configuration.
ec2:DescribeInstances: used to find active Determined agent instances based on tags.
ec2:RunInstances: used to provision Determined agent instances.
ec2:TerminateInstances: used to terminate idle Determined agent instances.

An example IAM policy with the appropriate permissions is below:

{
  "Version": "2012-10-17",
  "Statement": [
     {
       "Sid": "VisualEditor0",
       "Effect": "Allow",
       "Action": [
         "ec2:DescribeInstances",
         "ec2:TerminateInstances",
         "ec2:CreateTags",
         "ec2:RunInstances"
       ],
       "Resource": "*"
     }
  ]
}

If you need to attach an instance profile to the agent (e.g., iam_instance_profile_arn is set in the Cluster Configuration), make sure to add PassRole policy to the master role with Resource set to the desired agent role. For example:

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Effect": "Allow",
      "Action": "iam:PassRole",
      "Resource": "<arn::agent-role>"
    }
  ]
}

See Using an IAM Role to Grant Permissions to Applications Running on Amazon EC2 Instances for details.

Network Requirements¶

See Network Requirements for details.

Cluster Configuration¶

The Determined Cluster is configured with master.yaml file located at /usr/local/determined/etc/ on the Determined master instance. Below you’ll find an example configuration. See Cluster Configuration for details.

provisioner:
  master_url: <scheme://host:port>
  startup_script: <startup script>
  container_startup_script: <container startup script>
  agent_docker_network: determined
  max_idle_agent_period: 5m

  provider: aws
  region: <region>
  root_volume_size: 200
  image_id: <AMI ID>
  tag_key: <tag key for agent discovery>
  tag_value: <tag value for agent discovery>
  instance_name: determined-ai-agent
  ssh_key_name: <SSH key name>
  iam_instance_profile_arn: <IAM instance profile ARN>
  network_interface:
    public_ip: true
    security_group_id: <security group ID>
    subnet_id: <subnet ID>
  instance_type: p3.8xlarge
  max_instances: 5

Installation¶

These instructions describe how to install Determined for the first time; for directions on how to upgrade an existing Determined installation, see the Upgrades section below.

Ensure that you are using the most up-to-date Determined AMIs. Keep the AMI IDs handy as we will need them later (e.g., ami-0f4677bfc3161edc8).

Master¶

To install the master, we will launch an instance from the Determined master AMI.

Let’s start by navigating to the EC2 Dashboard of the AWS Console. Click “Launch Instance” and follow the instructions below:

Choose AMI: find the Determined master AMI in “My AMIs” and click “Select”.
Choose Instance Type: we recommend a t2.medium or more powerful.
Configure Instance: choose the IAM role according to Master IAM Role.
Add Storage: click Add New Volume and add an EBS volume of at least 100GB. If you have a previous Determined installation that you are upgrading, you want to use the attach the same EBS volume as the previous installation. This volume will be used to store all your experiment metadata and checkpoints.
Configure Security Group: choose or create a security group according to Network Requirements.
Review and launch the instance.
SSH into the Determined master and edit the config at /usr/local/determined/etc/master.yaml according to the guide on Cluster Configuration.
Start the Determined master by entering make -C /usr/local/determined enable-master into the terminal.

Agent¶

There is no installation needed for the agent. The Determined master will dynamically launch Determined agent instances based on the Cluster Configuration.

Upgrades¶

Upgrading an existing Determined installation with Dynamic Agents on AWS requires the same steps as an installation without dynamic agents. See Upgrades.

Monitoring¶

Both the Determined master and agent AMIs are configured to forward system journald logs and basic GPU metrics to AWS CloudWatch when their instances have the appropriate IAM permissions. These logs and metrics can be helpful for diagnosing infrastructure issues when using Dynamic Agents on AWS.

CloudWatch Logging¶

An instance needs the following permissions to upload logs to CloudWatch:

logs:CreateLogStream
logs:PutLogEvents
logs:DescribeLogStreams

Instances will upload their logs to the log group /determined/determined/journald. This log group must be created in advance before any logs can be stored.

An example IAM policy with the appropriate permissions is below:

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Effect": "Allow",
      "Action": [
        "logs:CreateLogStream",
        "logs:PutLogEvents",
        "logs:DescribeLogStreams"
      ],
      "Resource": [
        "arn:aws:logs:*:*:log-group:/determined/determined/journald",
        "arn:aws:logs:*:*:log-group:/determined/determined/journald:log-stream:*"
      ]
    }
  ]
}

CloudWatch Metrics¶

An instance needs the following permissions to upload logs to CloudWatch:

cloudwatch:PutMetricData

Instances will upload their metrics to namespace Determined.

An example IAM policy with the appropriate permissions is below.

{
  "Version": "2012-10-17",
  "Statement": [
    {
     "Action": [
       "cloudwatch:PutMetricData"
      ],
      "Effect": "Allow",
      "Resource": "*"
    }
  ]
}