Introduction to Determined¶
Interactive Job Configuration¶
The behavior of interactive jobs, such as TensorBoards, notebooks, commands, and shells, can be influenced by setting a variety of configuration variables. These configuration variables are similar but not identical to the configuration options supported by experiments.
Configuration settings can be specified by passing a YAML configuration file when launching the workload via the Determined CLI.
Configuration variables can also be set directly on the command line when any Determined task, except a TensorBoard, is launched.
Options set via
--config take precedence over values specified in the configuration file.
Configuration settings are compatible with any Determined task unless otherwise specified.
Commands and Shells¶
In addition to structured model training workloads, which are handled using experiments, Determined also supports more free-form tasks using commands and shells.
Commands execute a user-specified program on the cluster. Shells start SSH servers that allow using cluster resources interactively.
Commands and shells enable developers to use a Determined cluster and its GPUs without having to write code conforming to the trial APIs. Commands are useful for running existing code in a batch manner; shells provide access to the cluster in the form of interactive SSH sessions.
This document provides an overview of the most common CLI commands related to shells and commands; see Command-line Interface (CLI) Reference for full documentation.
At a typical organization, many Determined configuration files will contain similar settings. For example, all of the training workloads run at a given organization might use the same checkpoint storage configuration. One way to reduce this redundancy is to use configuration templates. With this feature, users can move settings that are shared by many experiments into a single YAML file that can then be referenced by configurations that require those settings.
Each configuration template has a unique name and is stored by the Determined master. If a configuration specifies a template, the effective configuration of the task will be the result of merging the two YAML files (configuration file and template). The semantics of this merge operation is described below. Determined stores this expanded configuration so that future changes to a template will not affect the reproducibility of experiments that used a previous version of the configuration template.
A single configuration file can use at most one configuration template. A configuration template cannot itself use another configuration template.
The Determined Queue Management system extends scheduler functionality to offer better visibility and control over scheduling decisions. It does this using the Job Queue, which provides better information about job ordering, such as which jobs are queued, and permits dynamic job modification.
Queue Management is a new feature that is available to the fair share scheduler and the priority scheduler. Queue Management, described in detail in the following sections, shows all submitted jobs and their states, and lets you modify some configuration options, such as priority, position in the queue, and resource pool.
To begin managing job queues, navigate to the WebUI
Job Queue section or use the
det job set
of CLI commands.
The Model Registry is a way to group together conceptually related checkpoints (including ones across different experiments), storing metadata and longform notes about a model, and retrieving the latest version of a model for use or futher development. The Model Registry can be accessed through the WebUI, Python SDK, REST API, or CLI, though the WebUI has some features that the others are missing.
The Model Registry is a top-level option in the navigation bar. This will take you to a page listing all of the models that currently exist in the registry, and allow you to create new models. You can select any of the existing models to go to the Model Details page, where you can view and edit detailed information about the model. There will also be a list of every version associated with the selected model, and you can go to the Version Details page to view and edit that version’s information.
For more information about how to use the model registry, see Organizing Models in the Model Registry
Jupyter Notebooks are a convenient way to develop and debug machine learning models, visualize the behavior of trained models, or even manage the training lifecycle of a model manually. Determined makes it easy to launch and manage notebooks.
Determined Notebooks have the following benefits:
Jupyter Notebooks run in containerized environments on the cluster. We can easily manage dependencies using images and virtual environments. The HTTP requests are passed through the master proxy from and to the container.
Jupyter Notebooks are automatically terminated if they are idle for a configurable duration to release resources. A notebook instance is considered to be idle if it is not receiving any HTTP traffic and it is not otherwise active (as defined by the
notebook_idle_typeoption in the task configuration).
Once a Notebook is terminated, it is not possible to restore the files that are not stored in the persistent directories. You need to ensure that the cluster is configured to mount persistent directories into the container and save files in the persistent directories in the container. See Save and Restore Notebook State for more information.
If you open a Notebook tab in JupyterLab, it will automatically open a kernel that will not be shut down automatically so you need to manually terminate the kernels.
TensorBoard is a widely used tool for visualizing and inspecting deep learning models. Determined makes it easy to use TensorBoard to examine a single experiment or to compare multiple experiments.
TensorBoard instances can be launched via the WebUI or the CLI. To launch TensorBoard instances from the CLI, first install the CLI on your development machine.
Determined is a deep learning training platform that simplifies infrastructure management for domain experts while enabling configuration-based deep learning functionality that engineering-oriented practitioners might find inconvenient to implement. The Determined cohesive, end-to-end training platform provides best-in-class functionality for deep learning model training, including the following benefits:
Automated model tuning
Optimize models by searching through conventional hyperparameters or macro- architectures, using a variety of search algorithms. Hyperparameter searches are automatically parallelized across the accelerators in the cluster. See Hyperparameter Tuning.
Cluster-backed notebooks, commands, and shells
Leverage your shared cluster computing devices in a more versatile environment. See Jupyter Notebooks and Commands and Shells.
Automatically manage ML accelerators, such as GPUs, on-premise or in cloud VMs using your own environment, automatically scaling for your on-demand workloads. Determined runs in either AWS or GCP, so you can switch easily according to your requirements. See Resource Pools, Scheduling, and Elastic Infrastructure.
Develop and train models in customizable containers that enable simple, consistent dependency management throughout the model development lifecycle. See Customize Environment.
Easily distribute a single training job across multiple accelerators to speed up model training and reduce model development iteration time. Determined uses synchronous, data-parallel distributed training, with key performance optimizations over other available options. See Distributed Training with Determined.
Automatically track your experiment configuration and environment to facilitate reproducibility and collaboration among teams. See Submit Experiment.
Models are checkpointed throughout the training process and can be restarted from the latest checkpoint, automatically. This enables training jobs to automatically tolerate transient hardware or system issues in the cluster.
Broad framework support leverages these capabilities using any of the leading machine learning frameworks without needing to manage a different cluster for each. Different frameworks for different models can be used without risking future lock-in. See Training APIs.
Visualize your model and training procedure by using The built-in WebUI and by launching managed Using TensorBoard instances.
When running in a cloud environment, Determined can automatically provision and terminate GPU instances as the set of deep learning workloads on the cluster changes. This capability is called elastic infrastructure. The agents that are provisioned by the system are called dynamic agents.
The diagram below outlines the high-level system architecture when using dynamic agents:
Following the diagram, the execution would be:
The master collects information on idle agents (agents with no active workloads) and pending workloads (agents waiting to be scheduled).
The master calculates the ideal size of the cluster and decides how many agents to launch and which agents to terminate. The calculation is done based on the configured scaling behavior and the specification of the resource pools.
An agent that is not running any containers is considered idle. By default, idle dynamic agents will automatically be terminated after 5 minutes of inactivity. This behavior gives agents a chance to run multiple workloads after they have been provisioned.
The master makes API calls to agent providers, such as AWS and GCP, to provision and terminate agents as necessary.
Once the agent instance has been created, it will automatically connect to the current master. The time it takes to create a new instance depends on the cloud provider and the configured instance type, but >60 seconds is typical.
An experiment represents the basic unit of running the model training code. An experiment is a collection of one or more trials that are exploring a user-defined hyperparameter space. For example, during a learning rate hyperparameter search, an experiment might consist of three trials with learning rates of .001, .01, and .1.
To run experiments, you need to write your model training code. A model definition represents a specification of a deep learning model and its training procedure. It contains training code that implements training APIs. Visit the Training API Guides for more information.
For each experiment, you can configure a searcher, also known as a search algorithm. The search algorithm determines how many trials will be run for a particular experiment and how the hyperparameters will be set. More information can be found at Hyperparameter Tuning.
To run tasks such as experiments or notebooks, Determined needs to have resources (CPUs, GPUs) on which to run the tasks. However, different tasks have different resource requirements and, given the cost of GPU resources, it is important to choose the right resources for specific goals so that you get the most value out of your money. For example, you may want to run your training on beefy V100 GPU machines, while you want your Tensorboards to run on cheap CPU machines with minimal resources.
Determined has the concept of a resource pool, which is a collection of identical resources that are located physically close to each other. Determined allows you to configure your cluster to have multiple resource pools and to assign tasks to a specific resource pool, so that you can use different sets of resources for different tasks. Each resource pool handles scheduling and instance provisioning independently.
When you configure a cluster, you set which pool is the default for auxiliary tasks and which pool
is the default for compute tasks. CPU-only tasks such as Tensorboards will run on the default
auxiliary pool unless you specify that they should run in a different pool when launching the task.
Tasks which require a slot, such as experiments or GPU-notebooks, will use the default compute pool
unless otherwise specified. For this reason it is recommended that you always create a cluster with
at least two pools, one with low-cost CPU instances for auxiliary tasks and one with GPU instances
for compute tasks. This is the default setup when launching a cluster on AWS or GCP using
Here are some scenarios where it can be valuable to use multiple resource pools:
Use GPU for training while using CPUs for TensorBoard.
You create one pool,
aws-v100, that provisions
p3dn.24xlargeinstances (large V100 EC2 instances) and another pool,
m5.largeinstances (small and cheap CPU instances). You train your experiments using the
aws-v100pool, while you run your Tensorboards in the
aws-cpupool. When your experiments complete, the
aws-v100 poolcan scale down to zero to save money, but you can continue to run your TensorBoard. Without resource pools, you would have needed to keep a
p3dn.24xlargeinstance running to keep the TensorBoard alive. By default Tensorboard will always run on the default CPU pool.
Use GPUs in different availability zones on AWS.
You have one pool
us-east-1aavailability zone and another pool
p3dn.24xlargeinstances in the
us-east-1bavailability zone. You can launch an experiment into
aws-v100-us-east-1aand, if AWS does not have sufficient
p3dn.24xlargecapacity in that availability zone, you can launch the experiment in
aws-v100-us-east-1bto check if that availability zone has capacity. Note that currently the “AWS does not have capacity” notification is only visible in the master logs, not on the experiment itself.
Use spot/preemptible instances and fall back to on-demand if needed.
You have one pool
aws-v100-spotthat you use to try to run training on spot instances and another pool
aws-v100-on-demandthat you fall back to if AWS does not have enough spot capacity to run your job. Determined will not switch from spot to on-demand instances automatically, but by configuring resource pools appropriately, it should be easy for users to select the appropriate pool depending on the job they want to run and the current availability of spot instances in the AWS region they are using. For more information on using spot instances, refer to Use Spot Instances.
Use cheaper GPUs for prototyping on small datasets and expensive GPU for training on full datasets.
You have one pool with less expensive GPUs that you use for initial prototyping on small data sets and another pool that you use for training more mature models on large datasets.
Currently resource pools are completely independent from each other so it is not possible to launch an experiment that tries to use one pool and then falls back to another one if a certain condition is met. You will need to manually decide to shift an experiment from one pool to another.
A cluster is not currently allowed to have resource pools in multiple AWS/GCP regions or across multiple cloud providers. If the master is running in one AWS/GCP region, all resource pools must also be in that AWS/GCP region.
If you create a task that needs slots and specify a pool that will never have slots (i.e. a pool with CPU-only instances), that task can never get scheduled. Currently that task will appear to be PENDING permanently.
Set up Resource Pools¶
Resource pools are configured using the Master Configuration Reference. For each resource pool, you can configure scheduler and provider information.
If you are using static resource pools and launching agents by hand, you will need to update the Agent Configuration Reference to specify which resource pool the agent should join.
Migrate to Resource Pools¶
With the introduction of resource pools, the Master Configuration Reference format has changed to a new format.
This is a backwards compatible change and cluster configurations in the old format will continue to work. A configuration in the old format is interpreted as a cluster with a single resource pool that is the default for both CPU and GPU tasks. However, to take full advantage of resource pools, you will need to convert to the new format, which is a simple process of moving around and renaming a small number of top-level fields.
The old format had the top level fields of
provisioner which set the scheduler
and provisioner settings for the cluster. The new format has the top level fields
resource_manager section is for cluster level
setting such as which pools should be used by default and the default scheduler settings. The
scheduler information is identical to the
scheduler field in the legacy format. The
resource_pools section is a list of resource pools each of which has a name, description and
resource pool level settings. Each resource pool can be configured with a
provider field that
contains the same information as the
provisioner field in the legacy format. Each resource pool
can also have a
scheduler field that sets resource pool specific scheduler settings. If the
scheduler field is not set for a specific resource pool, the default settings are used.
Note that defining resource pool-specific
scheduler settings is all-or-nothing. If the
scheduler field is blank, all scheduler settings will be inherited from the
settings defined in
resource_manager.scheduler. If any fields are set in the pool-specific
scheduler section, no settings will be inherited from
resource_manager.scheduler - you need
to redefine everything.
Here is an example master configuration illustrating the potential problem.
resource_manager: type: agent scheduler: type: round_robin fitting_policy: best default_aux_resource_pool: pool1 default_compute_resource_pool: pool1 resource_pools: - pool_name: pool1 scheduler: fitting_policy: worst
This example sets the cluster-wide scheduler defaults to use a best-fit, round robin scheduler in
resource_manager.scheduler. The scheduler settings at the pool level for
pool1 are then
scheduler.fitting_policy=worst is set, no settings are inherited from
resource_manager.scheduler so pool1 uses a worst-fit, fair share scheduler because for a blank
scheduler.type field, the default value is
If you want to have
pool1 use a worst-fit, round robin scheduler, you need to make sure you
redefine the scheduler type at the pool-specific level:
resource_manager: type: agent scheduler: type: round_robin fitting_policy: best default_aux_resource_pool: pool1 default_compute_resource_pool: pool1 resource_pools: - pool_name: pool1 scheduler: type: round_robin fitting_policy: worst
Launch Tasks into Resource Pools¶
When creating a task, the job configuration file has a section called “resources”. You can set the
resource_pool subfield to specify the
resource_pool that a task should be launched into.
resources: resource_pool: pool1
If this field is not set, the task will be launched into one of the two default pools defined in the
Master Configuration Reference. Experiments will be launched into the default compute pool.
Tensorboards will be launched into the default auxiliary pool. Commands, Shells, and Notebooks that
request a slot (which is the default behavior if the
resources.slots field is not set) will be
launched into the default compute pool. Commands, Shells, and Notebooks that explicitly request 0
slots (for example the “Launch CPU-only Notebook” button in the Web UI) will use the auxiliary pool.
This document covers the supported scheduling policies. The first section describes the native scheduling capabilities supported by Determined. The next section describes how Determined schedules tasks when running on Kubernetes.
Administrators can configure the desired scheduler in master configuration file. It is also possible to configure different scheduling behavior for different resource pools.
Once the scheduling policy has been defined for the current master and/or resource pool, the scheduling behavior of an individual task is influenced by several task configuration values:
For the fair-share scheduler,
resources.weightlets users set the resource demand of a task relative to other tasks.
For the priority scheduler,
resources.prioritylets users assign a priority order to tasks.
Regardless of the scheduler,
searcher.max_concurrent_trialslets users cap the number of slots that an
adaptive_ashahyperparameter search experiment will request at any given time.
Zero-slot tasks (e.g., CPU-only notebooks, tensorboards) are scheduled independently of tasks that require slots (e.g., experiments, GPU notebooks). The fair-share scheduler schedules zero-slot tasks on a FIFO basis. The priority scheduler schedules zero-slot tasks based on priority.
The master allocates cluster resources (slots) to active tasks based on their priority. High-priority tasks are preferred to low-priority tasks. Low-priority tasks will be preempted to make space for pending high-priority tasks if possible. Tasks of equal priority are scheduled in the order in which they were created.
By default, the priority scheduler does not use preemption. If preemption is enabled in the master configuration file, when a higher priority task is pending and cannot be scheduled because no idle resources are available, the scheduler will attempt to schedule it by preempting lower priority tasks, starting with the task with the lowest priority. If there are no tasks to preempt, lower priority tasks might be backfilled on the idle resources. When a trial is preempted, its state is checkpointed so that the progress of the trial is not lost. Enabling preemption ensures that cluster resources can be reallocated to high priority tasks more promptly and backfilled to make the most use of the idle resources; however, preemption can also result in additional overhead due to checkpointing low priority tasks, which might be expensive for some models.
Notebooks, tensorboards, shells, and commands are not preemptible. These tasks will continue to occupy cluster resources until they complete or are terminated.
The priority of any task can be changed after it is created using one of the following commands:
det experiment set priority <ID> <priority> det command set priority <ID> <priority> det notebook set priority <ID> <priority> det shell set priority <ID> <priority> det tensorboard set priority <ID> <priority>
However, since only experiments are preemptible, changing the priority of any other kind of task after it is scheduled has no effect. (It can still be useful to change the priorities of such tasks before they are scheduled in order to affect when they ultimately start running.)
An example of priority scheduler behavior with preemption enabled:
User submits a priority 2 adaptive_asha experiment with max_concurrent_trials 20 and slots_per_trial 1. 8 trials run and utilize all 8 GPUs.
User submits a priority 1 distributed training experiment with slots_per_trial 4. 4 ASHA trials are preempted so the new distributed training experiment can run. Note that if preemption was not enabled, the new experiment would not get scheduled until the ASHA experiment GPU demand becomes <= 4.
User starts a priority 3 notebook with resources.slots 1. The notebook has a lower priority than the two active experiments, so it will run as soon as the two active experiments collectively need <= 7 GPUs.
ASHA and the distributed training experiment both complete, and the notebook task with priority 3 will run.
User submits a priority 1 distributed training experiment with slots_per_trial 8. Although this workload has a higher priority than the active notebook task, it cannot be scheduled because it requires 8 slots, notebooks are not preemptible, and therefore only 7 slots are available.
User submits a priority 2 distributed training experiment with slots_per_trial 4. One trial will be scheduled to make use of the idle 7 slots.
The notebook is killed. The priority 2 distributed training experiment is preempted. And then the priority 1 distributed training experiment starts running. Once that experiment is complete, distributed training experiment with priority 2 restarts.
The priority scheduler can be used with the Determined job queue, which provides more insight into scheduling decisions.
Scheduling with Kubernetes¶
When using Determined on Kubernetes, Determined workloads, such as experiments, notebooks, and shells, are started by launching Kubernetes pods. The scheduling behavior that applies to those workloads depends on how the Kubernetes scheduler has been configured.
By default, the Kubernetes scheduler does not perform gang scheduling or support preemption of pods. While it does take pod priority into account, it greedily schedules pods without consideration for the job each pod belongs to. This can result in problematic behavior for deep learning workloads, particularly for distributed training jobs that use many GPUs. A distributed training job that uses multiple pods requires all pods to be scheduled and running in order to make progress. Because Kubernetes does not support gang scheduling by default, cluster deadlocks can arise. For example, suppose that two experiments are launched simultaneously that each require 16 GPUs on a cluster with only 16 GPUs. It is possible that Kubernetes will assign some GPUs to one experiment and some GPUs to the other. Because neither experiment will receive the resources it needs to begin executing, the system will wait indefinitely.
One way Determined addresses these problems is through the use of the lightweight coscheduling plugin, which extends the Kubernetes scheduler to support priority-based gang scheduling. To implement gang scheduling, the coscheduling plugin will not schedule a pod unless there are enough available resources to also schedule the rest of the pods in the same job. To function, the plugin requires special labels to be set that specify the number of nodes that each job needs for execution. Determined automatically calculates and sets these labels for GPU experiments that it launches.
The coscheduling plugin is in beta and is therefore not enabled by default. To enable it, edit
values.yaml in the Determined Helm chart to set the
defaultScheduler field to
There are several limitations to the coscheduling plugin to be aware of:
The coscheduling plugin does not work with Kubernetes’ cluster autoscaling feature. Static node pools must be used to achieve gang scheduling
The plugin does not support preemption. For example, if the cluster is full of low priority jobs and a new high priority job is submitted, the high priority job will not be scheduled until one of the low priority jobs finishes.
The Determined capability to automatically set pod labels is restricted to GPU experiments. Determined does not currently set labels for CPU experiments or user commands.
When scheduling experiments that utilize the entire cluster, the plugin may take several minutes to schedule the next job. Because the coscheduler only approves of jobs when all of its pods are available, it may repeatedly reject partially-ready jobs, causing them to wait further.
To enable gang scheduling with commands or CPU experiments, enable the coscheduler in
values.yaml and modify the experiment config to contain the following:
environment: pod_spec: metadata: labels: pod-group.scheduling.sigs.k8s.io/name: <unique task name> pod-group.scheduling.sigs.k8s.io/min-available: <# of GPUs required> spec: schedulerName: coscheduler
You can also use
schedulerName: default-scheduler to use the default Kubernetes scheduler.
Additionally, please note that when running Determined on Kubernetes, a higher priority value means a higher priority (e.g. a priority 50 task will run before a priority 40 task).
Priority Scheduling with Preemption¶
Determined also makes available a priority scheduler that extends the Kubernetes scheduler to support preemption with backfilling. This plugin will preempt existing pods if higher priority pods are submitted. If there is still space in the cluster, backfilling will attempt to fill the nodes by scheduling lower priority jobs. Additionally, if there are leftover slots on partially-filled nodes, the scheduler will attempt to assign single-slot tasks until the space is filled. This packing behavior only occurs with single-slot tasks.
This plugin is also in beta and is not enabled by default. To enable it, edit
values.yaml in the
Determined Helm chart to set the
defaultScheduler field to
preemption. Autoscaling is not
supported and Determined can only automatically set labels for GPU experiments.
Determined provides a default priority class,
determined-medium-priority that has a priority of
50 and is used for all tasks. If users want to set a different priority level for an experiment,
they may either specify a priority in the
resources field of the experiment config or create a
priorityClass and specify it in the
pod_spec of the config. If both are specified, the specified
priorityClass will take precedence over the priority field. In Kubernetes, a higher priority value
means a higher priority (e.g. a priority 50 task will run before a priority 40 task).
Additionally, if using a cluster with tainted nodes or labels, users must specify the tolerations or
node selectors in the
pod_spec. It is recommended that you use both tolerations and node
selectors to better constrain where your experiments can run, especially on clusters that contain
multiple GPU types.
Below is an example that illustrates how to set priorities, tolerations, and node selectors.
resources: priority: 42 # priorityClass, if set, takes precedence over this value environment: pod_spec: apiVersion: v1 kind: Pod spec: priorityClassName: determined-medium-priority # don't set if using priority value nodeSelector: key: value tolerations: - key: "key1" operator: "Equal" value: "value" effect: "NoSchedule"
The Kubernetes priority scheduler can be used with the Determined job queue feature, which allows more insight into scheduling decisions.
A trial is a training task with a defined set of hyperparameters. A common degenerate case is an experiment with a single trial, which corresponds to training a single deep learning model.
Workspaces and Projects¶
Workspaces and projects provide a way to organize experiments. A project is a collection of experiments, and a workspace is a collection of projects. Learn more about workspaces and projects at Workspaces and Projects.
RBAC and User Groups¶
Role Based Access Control (RBAC) enables administrators to control user access to various actions and data within Determined. RBAC feature requires Determined Enterprise Edition. Learn more about RBAC and User Group usage at RBAC.
YAML is a markup language often used for configuration. Determined uses YAML for configuring tasks such as experiments and notebooks, as well as configuring the Determined cluster as a whole. This guide describes a subset of YAML that is recommended for use with Determined. This is not a full description of YAML; see the specification or other online guides for more details.
A value in YAML can be a
null or number, string, or Boolean scalar, or an array or map
collection. Collections can contain other collections nested to any depth, although, the Determined
YAML files generally have a fixed structure.
A comment in a YAML file starts with a
# character and extends to the end of the line.
If you are familiar with JSON, you can think of YAML as an alternative way of expressing JSON objects that is meant to be easier for humans to read and write, since it allows comments and has fewer markup characters around the content.
Maps represent unordered mappings from strings to YAML values. A map is written as a sequence of key-value pairs. Each key is followed by a colon and the corresponding value. The value can be on the same line as the key if it is a scalar (in which case it must be preceded by a space) or on subsequent lines (in which case it must be indented, conventionally by two spaces).
A map is used in the experiment configuration to configure hyperparameters:
hyperparameters: base_learning_rate: 0.001 weight_cost: 0.0001 global_batch_size: 64 n_filters1: 40 n_filters2: 40
The snippet above describes a map with one key,
hyperparameters; the corresponding value is
itself a map whose keys are
An array contains multiple other YAML values in some order. An array is written as a sequence of values, each one preceded by a hyphen and a space. The hyphens for one list must all be indented by the same amount.
An array is used in the experiment configuration to configure environment variables:
environment: environment_variables: - A=A - B=B - C=C
Scalars generally behave naturally:
"foo" all have the same
meanings that they would in JSON (and many programming languages). However, YAML allows strings to
foo is the same as
"foo". This behavior is often convenient, but it can lead to
unexpected behavior when small edits to a value change its type. For example, the following YAML
block represents a list containing several values whose types are listed in the comments:
- true # Boolean - grue # string - 0.0 # number - 0.0. # string - foo: bar # map - foo:bar # string - foo bar # string
Example Experiment Configuration¶
A Determined configuration file consists of a YAML object with a particular structure: a map at the top level that is expected to have certain keys, with the value for each key expected to have a certain structure in turn.
In this example experiment configuration, numbers, strings, maps, and an array are demonstrated:
name: mnist_tf_const data: base_url: https://s3-us-west-2.amazonaws.com/determined-ai-datasets/mnist/ training_data: train-images-idx3-ubyte.gz training_labels: train-labels-idx1-ubyte.gz validation_set_size: 10000 hyperparameters: base_learning_rate: 0.001 weight_cost: 0.0001 global_batch_size: 64 n_filters1: 40 n_filters2: 40 searcher: name: single metric: error max_length: batches: 500 smaller_is_better: true environment: environment_variables: - A=A - B=B - C=C
Validate YAML: http://www.yamllint.com/
Convert YAML to JSON: https://www.json2yaml.com/convert-yaml-to-json